08.09.21
Proell will be showcasing several products at Fakuma 2021.
• NORIPHAN HTR N 990/010 NC - non-conductive black for IMD/FIM technology
NORIPHAN HTR N is an established, formable, back moldable and solvent-based one-component screen printing ink for film insert molding technology.
Due to the development of the new deep black color shade NORIPHAN HTR N 990/010 NC, a carbon-free, non-conductive black is available for printed electronic applications now.
The color shade can be used for decorative prints but is mainly used for plane multi-layer printing or backing of metallic and polymer conductive pastes. Carbon-based pigments, so-called carbon blacks, normally used for black color shades, are electrically conductive and can interfere with the functional structures. The NORIPHAN HTR N 990 NC color shade has been formulated and optimized regarding the interlayer adhesion and shows good adhesion in compound values in the final film/ink/injection material composition.
• NORIPHAN N2K screen printing ink for IMD/FIM technology
NORIPHAN N2K is a well-established solvent-based two-component screen printing ink for IMD/FIM technology. The glossy ink system is optimized for processing thin PC films (< 175 µm). Films decorated with NORIPHAN N2K show no curling effect.
This IMD/FIM ink system is used especially for printed electronics applications.
The deep black and opaquely formulated color shade NORIPHAN N2K 953 is suitable for the decoration of touch panels and shows high electrical resistance in capacitive applications. NORIPHAN N2K ink system is also used for overprinting, embedding and protecting of the sensitive conductive pastes. The ink layers prevent from wash-out effects during the injection molding process.
Films printed with NORIPHAN N2K are perfectly suitable for the IMD/FIM process (In-Mold-Decoration/Film Insert Molding), with good formability e.g. high pressure forming or thermoforming.
• Norilux DC
Norilux DC is a formable, abrasion and chemically resistant dual cure screen printing lacquer. It can be used as protective lacquer or hard coat on PC, PMMA, ABS and PP films.
Norilux DC is ideally suited for first surface coating/protection of products manufactured in IMD/FIM technology. The glossy version of the dual cure lacquer can be printed on textured film surfaces to produce abrasion resistant and transparent display windows.
Besides the high glossy Norilux DC lacquer, various satin gloss, textured and matt grades as well as pigmented and UV stabilized versions are available. Tactile surface structures e.g. brush effects and 3D patterns can be printed with the highly resistant lacquer.
Norilux DC dries by evaporation of the solvents in jet dryers. Films decorated with Norilux DC can be 3D formed after box oven drying e.g. by high pressure forming or thermo forming. Afterwards, the formed films must be UV cured. The cured lacquer layer shows excellent resistances to abrasion, chemicals and cleaning agents and passes various creme tests of the automobile industry. In automotive interior, center stacks, touch panels and decorative trims are first surface protected with Norilux DC. Even mobile phone covers and sanitary panels are overprinted with the highly resistant lacquer.
• NoriCure HC-1
NoriCure HC-1 is a UV-curing screen printing lacquer showing excellent scratch and abrasion resistance. The cured surface of the lacquer resists even strong wipes with steel wool.
The high gloss UV-lacquer is designed for printing on PC films, coated PET films (e.g. Autotype Autoflex EPG 180, Autotex V200), and various rigid PVC films and for overprinting of printed products.
The lacquer is used to overprint and protect displays, lenses and panels. The cured lacquer shows excellent resistance to chemicals and cleaning agents. Besides the high gloss NoriCure HC-1, matt (NoriCure HC-1-001) and textured (NoriCure HC-1-002), as well as UV-stabilized (NoriCure HC-1-003) versions, are available.
• NORIPHAN HTR N 990/010 NC - non-conductive black for IMD/FIM technology
NORIPHAN HTR N is an established, formable, back moldable and solvent-based one-component screen printing ink for film insert molding technology.
Due to the development of the new deep black color shade NORIPHAN HTR N 990/010 NC, a carbon-free, non-conductive black is available for printed electronic applications now.
The color shade can be used for decorative prints but is mainly used for plane multi-layer printing or backing of metallic and polymer conductive pastes. Carbon-based pigments, so-called carbon blacks, normally used for black color shades, are electrically conductive and can interfere with the functional structures. The NORIPHAN HTR N 990 NC color shade has been formulated and optimized regarding the interlayer adhesion and shows good adhesion in compound values in the final film/ink/injection material composition.
• NORIPHAN N2K screen printing ink for IMD/FIM technology
NORIPHAN N2K is a well-established solvent-based two-component screen printing ink for IMD/FIM technology. The glossy ink system is optimized for processing thin PC films (< 175 µm). Films decorated with NORIPHAN N2K show no curling effect.
This IMD/FIM ink system is used especially for printed electronics applications.
The deep black and opaquely formulated color shade NORIPHAN N2K 953 is suitable for the decoration of touch panels and shows high electrical resistance in capacitive applications. NORIPHAN N2K ink system is also used for overprinting, embedding and protecting of the sensitive conductive pastes. The ink layers prevent from wash-out effects during the injection molding process.
Films printed with NORIPHAN N2K are perfectly suitable for the IMD/FIM process (In-Mold-Decoration/Film Insert Molding), with good formability e.g. high pressure forming or thermoforming.
• Norilux DC
Norilux DC is a formable, abrasion and chemically resistant dual cure screen printing lacquer. It can be used as protective lacquer or hard coat on PC, PMMA, ABS and PP films.
Norilux DC is ideally suited for first surface coating/protection of products manufactured in IMD/FIM technology. The glossy version of the dual cure lacquer can be printed on textured film surfaces to produce abrasion resistant and transparent display windows.
Besides the high glossy Norilux DC lacquer, various satin gloss, textured and matt grades as well as pigmented and UV stabilized versions are available. Tactile surface structures e.g. brush effects and 3D patterns can be printed with the highly resistant lacquer.
Norilux DC dries by evaporation of the solvents in jet dryers. Films decorated with Norilux DC can be 3D formed after box oven drying e.g. by high pressure forming or thermo forming. Afterwards, the formed films must be UV cured. The cured lacquer layer shows excellent resistances to abrasion, chemicals and cleaning agents and passes various creme tests of the automobile industry. In automotive interior, center stacks, touch panels and decorative trims are first surface protected with Norilux DC. Even mobile phone covers and sanitary panels are overprinted with the highly resistant lacquer.
• NoriCure HC-1
NoriCure HC-1 is a UV-curing screen printing lacquer showing excellent scratch and abrasion resistance. The cured surface of the lacquer resists even strong wipes with steel wool.
The high gloss UV-lacquer is designed for printing on PC films, coated PET films (e.g. Autotype Autoflex EPG 180, Autotex V200), and various rigid PVC films and for overprinting of printed products.
The lacquer is used to overprint and protect displays, lenses and panels. The cured lacquer shows excellent resistance to chemicals and cleaning agents. Besides the high gloss NoriCure HC-1, matt (NoriCure HC-1-001) and textured (NoriCure HC-1-002), as well as UV-stabilized (NoriCure HC-1-003) versions, are available.