10.26.17
Oct, 25, 2017
www.nrel.gov
Caption: Two hands holding the IMM solar cellA 6-inch MicroLink Devices high-efficiency, lightweight and flexible ELO IMM solar cell wafer. (Photo courtesy of MicroLink Devices)
NREL Signs Technology Agreement for High Efficiency Multijunction Solar Cells
MicroLink Devices opens door for new multijunction solar cell applications.
The US Department of Energy’s (DOE) National Renewable Energy Laboratory (NREL) has entered into a license agreement with MicroLink Devices, Inc., Niles, IL, to commercialize NREL’s patented inverted metamorphic (IMM) multijunction solar cells.
While high-efficiency multijunction solar cells are commonly used for space satellites, researchers have continued to look for ways to improve cost and performance to enable a broader range of applications. The IMM technique licensed by MicroLink Devices enables multijunction III-V solar cells to be grown with both higher efficiencies and lower costs than traditional multijunction solar cells by reversing the order in which individual sub-cells are typically grown.
In contrast to traditional III-V multijunction solar cells, IMM devices are removed from their growth substrate, allowing the substrate to be reused over multiple growth runs – a component in reducing overall device costs. Removing the substrate also reduces the weight of the solar cell, which is important for applications such as solar-powered unmanned aerial vehicles.
MicroLink Devices is an Illinois-based ISO 9001 certified semiconductor manufacturer specializing in removing active semiconductor device layers from their growth substrate via a proprietary epitaxial liftoff (ELO) process. By utilizing its ELO capabilities, MicroLink will be able to make thin, lightweight, and flexible IMM solar cells that are ideal for use in unmanned aerial vehicles, space-based vehicles and equipment, and portable power generation applications.
MicroLink and NREL have collaborated to evaluate the use of ELO for producing IMM solar cells since 2009, when MicroLink was the recipient of a DOE PV Incubator subcontract from NREL. Tests of MicroLink-produced IMM solar cells conducted at NREL have demonstrated multiple successful substrate reuses and efficiencies exceeding 30%.
www.nrel.gov
Caption: Two hands holding the IMM solar cellA 6-inch MicroLink Devices high-efficiency, lightweight and flexible ELO IMM solar cell wafer. (Photo courtesy of MicroLink Devices)
NREL Signs Technology Agreement for High Efficiency Multijunction Solar Cells
MicroLink Devices opens door for new multijunction solar cell applications.
The US Department of Energy’s (DOE) National Renewable Energy Laboratory (NREL) has entered into a license agreement with MicroLink Devices, Inc., Niles, IL, to commercialize NREL’s patented inverted metamorphic (IMM) multijunction solar cells.
While high-efficiency multijunction solar cells are commonly used for space satellites, researchers have continued to look for ways to improve cost and performance to enable a broader range of applications. The IMM technique licensed by MicroLink Devices enables multijunction III-V solar cells to be grown with both higher efficiencies and lower costs than traditional multijunction solar cells by reversing the order in which individual sub-cells are typically grown.
In contrast to traditional III-V multijunction solar cells, IMM devices are removed from their growth substrate, allowing the substrate to be reused over multiple growth runs – a component in reducing overall device costs. Removing the substrate also reduces the weight of the solar cell, which is important for applications such as solar-powered unmanned aerial vehicles.
MicroLink Devices is an Illinois-based ISO 9001 certified semiconductor manufacturer specializing in removing active semiconductor device layers from their growth substrate via a proprietary epitaxial liftoff (ELO) process. By utilizing its ELO capabilities, MicroLink will be able to make thin, lightweight, and flexible IMM solar cells that are ideal for use in unmanned aerial vehicles, space-based vehicles and equipment, and portable power generation applications.
MicroLink and NREL have collaborated to evaluate the use of ELO for producing IMM solar cells since 2009, when MicroLink was the recipient of a DOE PV Incubator subcontract from NREL. Tests of MicroLink-produced IMM solar cells conducted at NREL have demonstrated multiple successful substrate reuses and efficiencies exceeding 30%.