06.27.17
Optomec will feature cost effective smart, connected products produced with its production grade Aerosol Jet 3D Printers at the Sensors Expo held in San Jose, CA this week. Optomec will perform live Aerosol Jet printing demonstrations, showcasing how products ranging from gas turbine engine blades to consumer hand held devices can be made smart with 3D printed sensors and antennas.
Highlighting the Optomec smart product showcase is a groundbreaking 3D Printed Sensor application that was developed working with our customer, General Electric (GE). The production solution utilizes Optomec’s Aerosol Jet system to print passive strain sensors directly onto turbine blades used in an industrial gas turbine.
The sensors are composed of a ceramic material that can withstand the very high operating temperatures seen in the hot section of the gas turbine. These sensors can detect deformations in the underlying metal that could ultimately result in an expensive and sometimes catastrophic failure. The data from the sensors has a direct tie to GE’s Predix software platform, demonstrating the digital convergence between Additive Manufacturing and the Internet of Things. Additionally, Optomec will display functional devices produced with Aerosol Jet systems, such as 3D printed sensors and antennas, semiconductor packaging, and Internet of Things applications.
Aerosol Jet technology is currently used in mass production for printing 3D conformal antennas and sensors for consumer electronics devices at the LITE-ON Mobile Mechanical SBG (LITE-ON) factory in Guangzhou, China.
Highlighting the Optomec smart product showcase is a groundbreaking 3D Printed Sensor application that was developed working with our customer, General Electric (GE). The production solution utilizes Optomec’s Aerosol Jet system to print passive strain sensors directly onto turbine blades used in an industrial gas turbine.
The sensors are composed of a ceramic material that can withstand the very high operating temperatures seen in the hot section of the gas turbine. These sensors can detect deformations in the underlying metal that could ultimately result in an expensive and sometimes catastrophic failure. The data from the sensors has a direct tie to GE’s Predix software platform, demonstrating the digital convergence between Additive Manufacturing and the Internet of Things. Additionally, Optomec will display functional devices produced with Aerosol Jet systems, such as 3D printed sensors and antennas, semiconductor packaging, and Internet of Things applications.
Aerosol Jet technology is currently used in mass production for printing 3D conformal antennas and sensors for consumer electronics devices at the LITE-ON Mobile Mechanical SBG (LITE-ON) factory in Guangzhou, China.